Главная » 2012 » Ноябрь » 6 » Magix - Samplitude Pro X & Suite 12.0.1.81 [19.12.2011, ENG]
18:25
Magix - Samplitude Pro X & Suite 12.0.1.81 [19.12.2011, ENG]
Год/Дата Выпуска: 19.12.2011 Версия: 12.0.1.81 Build DC2 Разработчик: Magix Разрядность: 32bit+64bit Совместимость с Vista: полная Совместимость с Windows 7: полная Язык интерфейса: Английский Таблэтка: Отсутствует Системные требования: 1.5 GHZ CPU, 1 GB RAM
Описание: В данной раздаче предлагаются обновления для Samplitude ProX и Samplitude ProX вышедшее 19.12.2011г. В данное обновление вошли следующие исправления: 12/13/2011 Samplitude Pro X (Suite) 12.0.1.81 -64 bit versions of the following plugins included -Vandal -eFX -Independence MX -Vita -When inserting a new plugin or when loading a project, the host matching bit version of the plugin will be loaded automatically (i.e. when loading a 32 bit project in a 64 bit host, also 64 bit plug-ins will be used) -64 bit version uses vstplugins_x64.ini if present instead of vstplugins.ini -Sometimes problems with loading of objects that included TS -fixed -32 bit versions are set LAA and can again address > 2GB VSTBridge -UAD-1 is supported -UAD latency/sync problems -fixed -Sidechain problems -fixed -VST MIDI Out implemented
Mixer / FX -essential FX -eFX_Reverb: New Plate II Classic Modus -eFX: load preset from other directory re-implemented -Build 73: eFX mousewheel handling -fixed -Hint for Vita 64 download (download link is not online yet) -Improved Spectral Editing, especially with active stereo display -Spectral Editing for Wave Editing. Destructive Editing is switched to Virtual Wave Editing for that purpose. -Visualization: improved and new presets -Uniformed naming for the preset "Parameters when opening the dialog" -"Parameters when opening the dialog" preset is also available for VST-Plugins now -Removed: OK+Cancel from realtime EQ, Dyn, Dist, Delay -Disabled surround plugin handling for AM-Munition and other plugins -Show master peakmeter for master track in arranger
Bugfixes: -Space key didn't work for destructive effects -fixed -Diverse Fixes for Elastic Audio -Latency problems when working with objects and pitchshifting while Object Editor is opened -fixed -VST parameter GUI fixed -Mixer: Fix for tooltip while automating -VST "transport changed" handling sometimes only correct for first track -fixed -Problems with loading of Track FX and nested menus -fixed Playback/Recording/Sync -Changed metronome switching behavior (keeps record/playback flags in stopped mode, sets corresponding flag while recording/playback) -Audio metronome with device different to master didn't work outside hybrid engine -Exact playback mute for hybrid engine after precount -Fix for record file name after copy&paste of tracks -Trackspeed for Virtual Waves -Support of frame rate 23.976 fps -Blue Sync-Position-Marker and Timecode-Timedisplay corrected by one ASIO-Buffer -MMC problem with Record Ready -fixed -MIDI Clock Send stopped during recording if VIP BPM in Sync option was enabled -fixed Import/Export/File Handling - "Collect project files" dialog is resizable and has a file date column -"Remove unused samples"-Dialog can be resized -Object menu "Edit Wave" opens Virtual Wave Editing if the following ini-entry is set and system option option "General" is enabled: [Setup] OpenDestructiveWaveProjectForObject=0 -When opening Wave Editing, range from VIP was not always transferred to Wave Editing -fixed -Bounce Dialog remembers sample rate during session -Progress bar for Multitrack Bounce and Freeze "File x of Files y" -Synced range display for export CD-Track by track -Project offset was not used with time stamp in OE -BWF Editor: Problem with editing timestamp if record-take does not start at position 0 -Bugfixes for timestamp handling -Several AAF / OMF fixes -Extended error message for long paths (PathSizeError) -RF64 Marker in 16 Bit WAV files was not read -fixed -RIFF64 files with RF64-extension were not handled correctly -fixed -Problem with Import of MPEG2 files with MP2 extension -fixed -Wrong wave graphics with files >4GB -fixed -Problems if existing HDP had different bit depth than WAV -fixed -Crash when saving a destructive MP3 project -fixed -Problems with CD Start Track Option and burning CD-Text, CD Import... -fixed -Problems with Compare CD -fixed Docking / Improved Shortcut Handling -Active docking window is indicated in docking grabber -Project gets focus after docker is minimized by mouse -Shortcuts refer to active window, and if not used there are handed to project window -New shortcut "Set Focus to Docking Window" (Ctrl-B): By subsequent pressing of window shortcuts (e.g. Track Manager) focus will put to that window -Ctrl+F4, Ctrl+Tab and Ctrl+B shortcuts are automatically added for older ini-files with standard settings -"Set focus to project window"(Ctrl-P) always activates project window -Docking: Problem with Object Editor and MIDI-Editor after undocking them -fixed -Focus problem in MIDI-Editor -fixed -Transport scrubbing section did not collapse in docked state -fixed Enhanced Keyboard Input -Mixer: -Improved mixer control selection with cursor keys -Ctrl-B, Ctrl-F4 Handling -Context menu key supported -Manager: -F2 for renaming -Context menu key supported -New menu commands for window access -Close docking tab (default shortcut Ctrl+F4) -Next docking tab (default shortcut Ctrl+Tab), also works for project window -Minimize docker Improvements for visually impaired users -.INZ can also be loaded with Open Project dialog. The program will do an automatic restart afterwards. -Setup_VisuallyImpaired.INZ with collected settings: -Ini-setting to open new dialogs (Manager...) in un-docked state [Setup] ForceFloatingWindows=1 -General ini-Setting [Setup] OptimizeForVisuallyImpaired=-1 or Customize\GUI_OptimizeForVisuallyImpaired.INZ -Playback triggered with Shift-Space -Mixer -Extended control and value display in mixer caption -TAB and SPACE key in mixer (similar to Cursor down and Enter) -Visualization: -Value display (Act, Max, RMS) in dialog title -FX Dialogs -Some dialogs can be interpreted better by Screenreaders -VST-Dialogs do open with Parameter-GUI by default, Parameter can be edited in a range of 0-100% -"Remove Plug-in" command VST-Dialog-Menu MIDI -MIDI functions are not deactivated automatically if there is no MIDI Out Device (needed for work with VSTi) -Very slow opening of MIDI Editor -fixed -Problem with playcursor display in MIDI Editor -fixed -Fixes for Raster Snap (Half Notes) Hardware Controller -Korg NanoKontrol2.cps added -Problems with controller initialization during program start -fixed -Problems with re-initialization after changes in HWC-Dialog -fixed -MIDI-Ping from controller couldn't be set -fixed -Problems with display and processing of incoming MIDI-Messages -fixed -Mackie-Protocol: Learning of MIDI-CC with absolute values (not endless) was not possible -fixed -Learning of invalid MIDI-Messages is prevented -Problems with "Learn Hardware Controller" (in Mixer menu) -fixed -Track names of colored tracks did not show up in controller display -fixed -Frontier Tranzport display problems -fixed -"Save as…"-dialog showed „Open"-Button -fixed -Volume scale changed to +12dB matching Sam Pro X skins -Problems at creation of fader scale -fixed -Some general stability problems with HW controllers (e.g. EUCON) -fixed General -Carbon skin added -Time Display: New field "Record length (Take)" -Editing of timestamps in Object Editor -Marker Manager: Tempo Marker: Double-click shows Tempo-Dialog, Checkbox sets Cursor Bugfixes -Fixes for Visualization setup apply button -Wrong sized dropdown boxes in non-german Visualization setup dialogs -fixed -Problem with spectroscope scale display -fixed -Sometimes drawing issues of waveform with scrolling in higher zoom -Track automation button could switch master automation button after master plugin or automation menu -fixed -Trackeditor fader section could not be collapsed -fixed -v11 Menu could not be loaded -fixed -Mixer size problem when creating a new project with an open mixer -fixed -Record dialog: Visualization did not open at second opening of record dialog -fixed -System Setup - "Reset all warnings" also resets Start-Dialog -Diverse problems with non-western character sets (manager font handling, ID3 tag handling), also Unicode ID3 tags can be read now (if they match the current system language) -Tooltip for audio engine selection was German only -fixed -Manager properties (like columns) were sometimes not remembered -fixed -OE MIDI: missing update on object change -OE: TS/PS apply to all fix -OE: default focus not on object name anymore -All folder tracks did show rubbers of first track in project -fixed -Wrong track selection display after loading -Range display vanished when play cursor is positioned -fixed -Locked objects could be moved into another project -fixed -Take Composer - Autoscroll is asynchronous -fixed -Missing take number refresh for project switch -fixed -Fix for content download after using DLV with dongle -Bugfixes for effect calculation in virtual waves -Problems with Robota object synth and multi CPU -fixed -Some crash fixes (Recording, 64 bit combo boxes, main automation menu handling) -Diverse fixes for Elastic Audio (Pitch Detection, Crashes) -Crash when playing back EQ116 automation -fixed
Доп. информация: Эти обновления не рекомендуется устанавливать на пропатченый Samplitude(кроме обновлений для Vita), регистрация слетает сразу. Сработает ли существующий патч с этим обновлением не знаю не проверял.
[/left]
Скачать Magix - Samplitude Pro X & Suite 12.0.1.81 [19.12.2011, ENG]
Год/Дата Выпуска: 19.12.2011 
